Our Pole Tents offer a classic, elegant look for weddings, festivals, corporate events and large outdoor gatherings. Designed and supported by center poles that help create the traditional peaked silhouette look that’s commonly associated with event tents. These provide spacious covered areas for guests, seating arrangements, dining and entertainment. Available in a variety of sizes and configurations. Pole Tents are a versatile choice for any size of event.
Available in 30ft, 40ft and 60ft widths and expandable 20' increments.
Download Spec Sheet
150 - 300 people
300 - 400 people
500 - 700 people
700 - 1000 people
BENEFITS FEATURES
Benefits
- Made in USA.
- Pole Tents are fully compatible with WSSL's Peak Pole® System.
- Interchangeable parts.
- Tent walls are interchangeable with our Marquee tents.
- Engineered to withstand winds of 100 km/hr (62mph).
- Tent drawings and installation manuals are available.
Materials
Fabric:
- Made by Herculite Architent 16oz laminated opaque blackout vinyl.
- Double braid polyester lacing on each seam.
Structure:
- Anodized aluminum side poles with steel fittings and steel center poles.
Safety & Setup
TENTS SHOULD NEVER BE USED AS EMERGENCY SHELTERS. In the event of severe or threatening weather, evacuate all guests and staff to a secure permanent building.
- Pole tents are designed to provide a strong, stable temporary structure when properly installed and anchored; however, they are not intended to provide protection during extreme or catastrophic weather.
- Monitor weather conditions before and throughout the event. Evacuate the tent if severe winds, thunderstorms, lightning, tornadoes, or other dangerous conditions are approaching.
- Always ensure the structure is properly anchored for the installation site and expected conditions. Soil conditions and local requirements can affect the anchoring system needed.
- Keep all entrances, exits and emergency routes clear and accessible at all times.
- Inspect the tent, anchoring system, cables, connections and fasteners before use and periodically during longer installations. Replace damaged or worn components before allowing occupancy.
- Do not allow guests or staff to climb, hang from or place additional loads on the tent frame.
- Do not allow snow, ice, water or debris to accumulate on the roof.
- Maintain adequate ventilation when the tent is enclosed, and follow all applicable fire, occupancy, electrical and local building requirements.
- Keep the structure clear of overhead power lines, tree branches and other potential hazards and identify underground utilities before staking or anchoring.
Installation manual and engineered tent drawings can be provided.
Certificates
- Tent fabric meets all Canadian and US fire retardant codes: CAN ULC-S109, NFPA 701 and California State Fire Marshal
- Our tents are backed by our Certificate of Flame Resistance.
